Y & Z CPM-B Continuous Passive Motion THERAPY
Continuous passive motion (CPM) is used during the first phase of rehabilitation following lower limb joint surgeries or traumas.
The CPM-B is a motorized device designed for continuous passive mobilization of the knee and hip. CPM (Continuous Passive Motion), is a perfect complement to the improvement process under hospital conditions, as well as during independent rehabilitation at home.
Since 1991, Zhengda Medical company has been steadily growing with continuous development and manufacturing of orthopaedic, rehabilitation and operating room equipment.
CPM-B Continuous Passive Motion Details
Features
– Two touch screens: on the remote control and home screen.
– The main screen works independently, allowing you to control the device without a remote control.
– 3 exercise programs.
– 9 speeds.
– Option to set the deviceโs working time.
– Option to set the bending angle and extension.
– Option to set torque control.
– Option to change the direction of movement during exercise.
– Emergency button.
Two touch screens.
Knee rehabilitation process.
Hip rehabilitation process.
Indications
Knee endoprostheses.
Hip endoprostheses.
Corrective osteotomy.
Intra-articular procedures.
Joint arthroscopy.
Reconstruction procedures for cruciate ligaments.
Mobilization of the joint after long immobilization.
Procedures affecting soft tissue around joints
Injuries and sprains of joints.
CPM-B Continuous Passive Motion Specifications.
CPM-B Continuous Passive Motion Advantages
Dual-channel touch screen control, dual-channel display and low noise.
Touch screen setting for angle, speed, time. Easy to use.
Angle sensor controls angle for more accurate operation.
Intelligent setting function of motion angle and speed mode.
CPU microcomputer control accurate values.
Suitable for adults with normal average height below 1.9 meters.
Dual-channel display and control suitable for joint operation and observation by patients and medical staff.
Knee joint sensor controls angle with torque protection function.
CPM-B Continuous Passive Motion Usage Steps
3 Exercise Programs
Normal program, Angle program and Speed program:
“Normal program” means the machine runs according to the set data.
“Angle program” means the machine runs according to the set data for about every 15 minutes, the extension angle automatically decreases by 3ยฐ and the flexion angle automatically increases by 3ยฐ, which means the overall running angle increases by 6ยฐ every 15 minutes.
“Speed program” means the machine runs according to the set data for about every 15 minutes, the running speed automatically increases by 1 level up to 9 level.